Daikin FTYN35DV1A Uživatelský manuál stáhnout pdf (Strana 9)

Preparation Before Operation

■ To operate the remote

controller

• To use the remote controller, aim the transmitter

at the indoor unit. If there is anything to block

signals between the unit and the remote control-

ler, such as a curtain, the unit will not operate.

•

Do not drop the remote controller. Do not get it wet.

• The maximum distance for communication is

about 7m.

■ To fix the remote controller

holder on the wall

1. Choose a place from where the sig-

nals reach the unit.

2. Fix the holder to a wall, a pillar, etc.

with the screws supplied with the

holder.

3. Place the remote controller in the

remote controller holder.

ATTENTION

■

About remote controller

•

Never expose the remote controller to direct sunlight.

•

Dust on the signal transmitter or receiver will reduce the sensitivity. Wipe off dust with soft cloth.

•

Signal communication may be disabled if an electronic-starter-type fluorescent lamp (such as

inverter-type lamps) is in the room. Consult the shop if that is the case.

•

If the remote controller signals happen to operate another appliance, move that appliance to some-

where else, or consult the shop.

Receiver

Remote controller

holder

Set.

To remove, pull it upwards.

01_EN_3P175973-2A.fm Page 8 Monday, February 20, 2006 3:02 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 25 26

Žádné komentáře

Daikin FTYN35DV1A Uživatelský manuál Strana 9